Listed below are new resources and operations added to the ArcGIS Server Administrator API since version 10.1.
11.2
New operations and resources
- Webhooks returns a list of all service webhooks that are currently configured for the organization, providing a centralized location for users with the appropriate permissions to view and manage service webhooks.
- Settings allows organization administrators to set the number of re-delivery attempts the system will make to deliver a payload to a receiver before the delivery is marked as a failure, as well as set the deactivation policy for service webhooks.
- Notification Status allows organization administrators to set the number of re-delivery attempts the system will make to deliver a payload to a receiver before the delivery is marked as a failure, as well as set the deactivation policy for service webhooks.
Updated operations and resources
Service webhooks have been updated to use signature verification to ensure the integrity and security of webhook payloads sent from ArcGIS Enterprise to a webhook receiver. Service webhooks can now be created or updated to use this new security measure.
11.1
Service webhooks
Support for feature service and geoprocessing service webhooks has been added to the ArcGIS Server Admin API at ArcGIS Enterprise 11.1. Feature service webhooks allow administrators to subscribe to event triggers pertaining to a feature service in their organization. Though geoprocessing services do not have specific event triggers that administrators can subscribe to, geoprocessing service webhooks will be invoked when a geoprocessing service job is completed. The following documentation has been added to this publication to serve as references for the service webhook endpoints:
New operations and resources
Lifecycle Information returns the date and time information (in Unix epoch format) of when a data store item was created and updated.
Updated operations and resources
- Two new properties, validFromEpoch and validUntilEpoch, have been added to the response of the SSL Certificate resource. The validFromEpoch property shows the date and time information (in Unix epoch format) for when a certificate's validity begins, and the validUntilEpoch property shows the date and time information (in Unix epoch format) for when a certificate's validity ends.
- The Export Site operation supports the validate parameter. The validate parameter ensures that the folder path where the exported content will be written is accessible to ArcGIS Server before performing the operation.
- The Import Site operation supports the validate parameter. The validate parameter ensures that the folder path where the exported site configuration is located is accessible to ArcGIS Server before performing the operation.
11.0
New operations and resources
- SOAP—This resource provides access to the soaphandlersconfig resource endpoint.
- SOAP Handlers Config—This resource lists the URLs for domains allowed to make cross-domain requests, including SOAP and OGC service requests.
- Edit SOAP Handler Config—This operation allows you to restrict cross-domain requests to specific domains, including SOAP and OGC service requests.
Updated operations and resources
- The Edit Services Directory operation supports a new parameter, callbackFunctionsEnabled. This parameter sets the flag to enable or disable the ability to make JSONP callback requests.
- The Upgrade operation supports a new parameter, enableDebug. This parameter sets the log level for the upgrade process.
ArcMap runtime support
At this release, ArcGIS Server no longer supports the ArcMap runtime or publishing services from ArcMap. After upgrading toArcGIS Enterprise 11.0 or later, any remaining geocode or geoprocessing services that were originally published from ArcMap cannot be started and must be republished from ArcGIS Enterprise. Starting from ArcGIS Enterprise 11.0, services must be created using the ArcGIS Pro service runtime and the ArcObjects11 provider.
10.9.1
Updated operations and resources
- The new security configuration property, allowInternetCORSAccess, controls the value of the "Access-Control-Allow-Private-Network" response header in a CORS preflight request to a REST service URL.
- Two new system properties have been added: maxHttpPostSizeInBytes and webServerMaxRequestThreads. maxHttpPostSizeInBytes allows users to change the maximum size in bytes for POST requests sent to ArcGIS Server. webServerMaxRequestThreads allows users to change the maximum number of threads that are available at one time to process requests sent to ArcGIS Server.
ArcMap runtime support
The Python Software Foundation has ended support for the Python 2 programming language, impacting the ArcMap service runtime that uses Python 2.x. At 10.9.1, when installing ArcGIS Server, you will have the option to disable the ArcMap service runtime, removing Python 2.x from your deployment. Disabling the ArcMap runtime will impact the following operations and resources in the ArcGIS Server Admin API:
- Start Service—If the ArcMap runtime is disabled, services with ArcMap (ArcObjects) as their service provider will be stopped. Attempting to start these services will result in an error.
- Create Service—Creating a service with ArcMap (ArcObjects) as the service provider when the ArcMap runtime is disabled will result in an error.
- Register Extension—Registering ArcMap-based SOE items to your organization when the ArcMap runtime is disabled will result in an error.
- Join Site—ArcGIS Server sites will be able to successfully run the joinSite operation if the joining machine has a matching status for the ArcMap runtime to that of the existing server site. If the joining machine has a conflicting ArcMap runtime status, attempting the joinSite operation will result in an error message.
- Register Machine—If the server machine being registered with the ArcGIS Server site has a conflicting ArcMap runtime status, attempting to register the machine will result in an error message.
- Providers—This resource now returns a list of enabled providers, indicating whether both the ArcMap (ArcObjects) and ArcGIS Pro (ArcObjects11) runtimes are enabled, or only the ArcGIS Pro runtime is enabled.
- Change Provider—This operation now supports changing the provider type of ArcMap services (ArcObjects) to ArcGIS Pro (ArcObjects11), migrating these services from the ArcMap service runtime to the ArcGIS Pro service runtime.
Note:
After 10.9.1, ArcGIS Server will no longer support the ArcMap runtime. It is recommended that you begin to prepare for this deprecation by migrating, republishing, or removing all services that use the ArcMap service runtime in your organization. For more information about migrating services, see Migrate a service in Server Manager and Migrating services to the ArcGIS Pro service runtime.
10.9
Deprecated items
The following items have been deprecated as of 10.9. Starting with Insights 2021.1, the registration and management of relational data store types should be performed with ArcGIS Insights. For more information, see Manage connector types.
- The Register Relational Data Store Type operation was introduced at 10.5 and allowed the user to register a new relational data store type with the server. This has been deprecated as of 10.9.
- The Edit Relational Data Store Type operation was introduced at 10.5 and allowed the user to edit a registered relational data store type to update its properties.
- The Relational Data Store Type resource was introduced at 10.5 and returned a list of the properties for a registered relational data store type.
- The Relational Data Store Types resource was introduced at 10.5 and returned a list of the relational data store types that were registered with the server.
- The Unregister Relational Data Store Types operation was introduced at 10.5 and allowed the user to unregister a relational data store type from the server.
Updated operations and resources
The Server Properties, uploadFileExtensionWhiteList and
uploadItemInfoFileExtensionWhitelist10.8.1
The following information has either been added or updated at 10.8.1:
- Edit Service now supports the ability to specify if a service's virtual directories are secured and require authentication. This is associated with the site-wide property that can be set through the Update Security Configuration operation.
Privilege-based access
Access to the Server Admin API is based off the privileges included in either a user's custom or default role, enabling administrators to restrict or grant access to the resources and operations that are associated with, and required by, their assigned privileges. At 10.8, this functionality was first introduced through changes made to administrator access to the Portal Admin API directory. At 10.8.1, this same privilege-based system has been implemented for the ArcGIS Server Admin API directory.
10.8
- Compatible map services published from ArcGIS Pro to ArcGIS Server, starting at 10.8, will initially use the shared instance pool by default. The default instance type can be changed either through the Server Manager or the Update Default Service Properties operation. As well, the instance type of an individual and compatible map service can be changed through the Change Provider operation.
- The Update Site Mode operation has a new parameter, allowEditingViaServices, that specifies if edits for feature services are allowed while the site is in read-only mode.
10.7.1
- The Federate Data Item operation can be used to create a data store item in your portal for a data store that has been registered with one of your portal's federated ArcGIS Server sites.
- featureServiceXSSFilter is a new property in Server Properties that is used to set the value of the xssPreventionRule for feature services when they are published by either applying an XSS filter to any attribute data input into a feature service for new or updated features, or filtering the input data and output data for XSS strings.
Deprecated items
- The Message Bus resource was introduced at 10.5 and allowed you to view and manage your message bus.
- The Message Bus Health Check operation was introduced at 10.5 and was used to return information for each machine that participated in the Message Bus service.
- The Message Bus Status resource was introduced at 10.5 and allowed you to view the status of the Message Bus service.
- The Start Message Bus service operation was introduced at 10.5 and allowed you to run your message bus service.
- The Stop Message Bus service operation was introduced at 10.5 and allowed you to stop your message bus service.
10.7
- The Big Data File Share Manifest Regeneration operation regenerates the manifest for a big data file share.
- The Synchronize Service Reset operation resets the Synchronization service, as well as restarts both the Synchronization and Compute platform services.
- The Compute Platform Health Check operation now returns the lastheartbeatString and hostname parameters in the request's response.
- TLSv1 is no longer the default for the Update Security Configuration operation. The default is now TLSv1.2.
- You can now include specific Request IDs in the filter parameter for a log query to view a comprehensive timeline of all log messages regarding the request.
- The javaHeapSize framework property has been added to the Create Service and Edit Service operations. javaHeapSize allows you to specify a heap size for a particular service, which overrides the default heap size properties you can set for all services by using the Edit Machine operation.
The following information has either been updated or added in Server Properties:
- The allowLegacyURLParser property now allows double quotation marks in URL query strings when set to true.
- enableNosniffHeader is a new property that, when set to true, has all network communication from ArcGIS Server including the X-Content-Type-Options response header with a value of nosniff, which helps protect against MIME confusion attacks.
- ldapCertificateValidation is a new property. When set to true, any encrypted LDAP communication (LDAPS) made from ArcGIS Server to the user or role identity store will enforce certificate verification.
- machineSuspendThreshold is a new property that defines the time period of inactivity after which a machine will be suspended from receiving administrative and publishing requests.
- The percentageMaxAllowedComputeCores property sets the maximum percentage of CPU, out of the total CPU available on the machine, that will be used by the compute platform worker process on a single node.
- The percentageMaxAllowedComputeMemory property sets the maximum percentage of memory, out of the total amount of memory available on the machine, that will be used by the compute platform worker process on a single node.
- suspendedMachineUnregisterThreshold is a new property that defines the time period of inactivity after which a machine will be unregistered from the site.
Deprecated items
- The Synchronization Service Health Check resource was introduced at 10.5 and was used to return information for each machine that participates in the synchronization service.
- The AppServer property from the Server Properties resource was introduced at 10.6 and was used to override the optimized architecture of ArcGIS Server to use legacy architecture. However, the AppServer property was only relevant when the singleClusterMode deployment was set to true.
10.6
JSON content type
The content-types for JSON and JSON with callback responses have been changed from text/plain.
- For JSON: Content-Type:application/json;charset=utf-8
- For JSON with callback: Content-Type:application/javascript;charset=utf-8
10.5
- The Relational Data Store Types resource indicates database platforms that have been registered with an ArcGIS Server site. Only sites that have been designated as a hosting server ever need to have relational data store types registered. Web clients (for example, Insights for ArcGIS) use these types when creating Relational Database Connection portal items. A Relational Database Connection portal item references a new service type: RelationalCatalogServer (in other words, Relational Catalog Service). At least one relational data store type must be registered with the hosting server before Relational Database Connections can be used.
10.4
- You can control changes to your ArcGIS Server site using the site mode resource. The Update Site Mode operation changes the site mode. For more information about site modes, see About ArcGIS Server site mode in the ArcGIS Server help documentation.
- Additional properties related to ArcGIS Server site mode have been added to serverProperties.
- A new property has been added to editConfigStore to control the location of the local repository for read-only site mode.
- unregisterDataItem now requires a new parameter force with the value set to true.
- A new editDataItem operation is supported to allow editing of data store item connection information.
10.3.1
- The Deployment resource is used to control the load-balancing functionality between GIS server machines. For example, in large sites with a single cluster, you can configure the site to remove the load balancing functionality between GIS server machines. This reduces network traffic between machines in the site and helps reduce load on your network.
- The Get Available Time Zones resource has been deprecated.
- The Service Types resource supports the dateFieldsTimezoneID and dateFieldsRespectsDaylightSavings properties for map and feature services.
10.3
- The Usage Report resource is used to obtain ArcGIS Server usage data for specified resources (for example, folders or services) during a given time period. Use the Edit Usage Report, Delete Usage Report, and Query Report Data operations to work with usage reports.
- The Usage Reports resource is a collection of all the usage reports created within your site. The Create Usage Reportoperation allows you to define a new usage report using JSON.
- The Usage Reports Settings resource returns the current settings for all usage reports in the site. You can edit these settings using the Edit Usage Reports Settings operation.
- The Start Data Store Machine, Stop Data Store Machine, Remove Data Store Machine, Make Data Store Primary Machine, and Validate Data Store operations allow you to work with the ArcGIS Data Store.
- The Start Services and Stop Services operations allow you to start and stop multiple services with a single command.
- You can disable browser caching of the Administrator Directory pages using the DisableAdminDirectoryCache property. The default is false. To disable browser caching, set this property to true.
- You can increase the speed of tile retrieval for cached services by specifying the number of users whose token information will be cached. This is controlled by the CacheSizeForSecureTileRequests property. If not specified, the default cache size is 200,000.
- If your organization includes multiple LDAP servers, you can specify the additional servers using the failOverLDAPServers property. This allows you to configure your organization's highly available LDAP with ArcGIS Server.
10.2
- The Export Site operation creates a backup of your site configuration. This includes information about the machines, services, server object extensions, users, roles, and other settings in your site. The Import Site operation restores the backup.
- The Get Roles By Privilege operation returns a list of roles associated with a given privilege. For example, you could use this operation to get a list of all roles that have the Publisher privilege.
- When configuring SSL on a machine, the Import Existing Server Certificate operation allows you to import a CA-signed certificate that you already own.
10.1 Service Pack 1
- The Services In Cluster resource gives you a report of all services participating in a given cluster.
- The Web Adaptors Configuration resource reports configuration information about your Web Adaptors, such as the shared key allowing encryption of items between your Web Adaptors and GIS server. You can set your own shared key and other properties using the new Update Web Adaptors Configuration operation.
- The Datastore Configuration resource reports configuration information about your store of registered folders and databases, such as whether the server administrator has blocked service publishers from automatically copying data to the server at publish time. You can block data copying and set other properties using the new Update Datastore Configuration operation.